Foz
Well-known member
So i'm trying to tackle my fuel gauge issues once again
I Replaced the fuel sender...still not working
Tested my fuel gauge by earthing the white wire (there are 2 wires out of the back of the gauge 1 white, 1 brown) straight to the body and it shoots to full, so i presume my gauge is fine?
So i ran a length of wire straight from the Sender terminal to the white wire and again gauge shoots to full, tried it to the brown wire and i get sparks.
i know my tank is approx half to a quarter full, yet every connection i try it shoots the gauge straight to full.....what am i doing wrong?...or what do i need to do, to establish the correct connection. and make the sender work correctly?
i'm no mechanic or electrician, so idiot proof directions/advice would be handy
I have an electrical tester, but not quite sure what or how to test with certain knowledge.....i did however test the brown wire out the back of the gauge and a reading of approx 10.47volts comes up....tested the wire at the sender end and i get nothing at all, am i supposed to get a reading at that end?
help please :?
I Replaced the fuel sender...still not working
Tested my fuel gauge by earthing the white wire (there are 2 wires out of the back of the gauge 1 white, 1 brown) straight to the body and it shoots to full, so i presume my gauge is fine?
So i ran a length of wire straight from the Sender terminal to the white wire and again gauge shoots to full, tried it to the brown wire and i get sparks.
i know my tank is approx half to a quarter full, yet every connection i try it shoots the gauge straight to full.....what am i doing wrong?...or what do i need to do, to establish the correct connection. and make the sender work correctly?
i'm no mechanic or electrician, so idiot proof directions/advice would be handy
I have an electrical tester, but not quite sure what or how to test with certain knowledge.....i did however test the brown wire out the back of the gauge and a reading of approx 10.47volts comes up....tested the wire at the sender end and i get nothing at all, am i supposed to get a reading at that end?
help please :?