Handbrake Cable Routing - Which is the correct Route?

[cunning plan]

I'm going to bump this up is that's OK- Would anyone mind supplying the indicated dimensions?

I would but two problems.

I am not near my bus and which indicated dimensions? :?

Once I get these handbrake cables routed, my engine running a little better, and a working washer pump, I will have a fully functioning van!!!!!!

IIRC, was your bus the one that had nothing left on it which was found / used in a builders yard or something? :|

If so, that is a huge achievement. Do you have a build thread link to save me searching around for it?

 

[Happystamps]

I'm going to bump this up is that's OK- Would anyone mind supplying the indicated dimensions?

I would but two problems.

I am not near my bus and which indicated dimensions? :?

Once I get these handbrake cables routed, my engine running a little better, and a working washer pump, I will have a fully functioning van!!!!!!

IIRC, was your bus the one that had nothing left on it which was found / used in a builders yard or something? :|

If so, that is a huge achievement. Do you have a build thread link to save me searching around for it?

Haha- fair enough! I've edited my post!

And yeah, that's the chap. Here's a link... Things have slowed down a little recently, a big bit of metal fell on the girlfriend's mini so I've been fiddling with that recently, new screen, bashing out the scuttle panel... blah blah blah... But I've got to start dividing my time up a bit I think, so one evening a week will be van, the other will be Mini.

Here's a link... The quality of the work is varied to be honest. It's my first restoration and while everything is solid and safe, there are some ugly bits. I don't mind really, it shows how far I've come.

http://www.volkszone.com/VZi/showthread.php?t=668144" onclick="window.open(this.href);return false;

 

[cunning plan]

Haha- fair enough! I've edited my post!

If no one else closer to their bus can provide the measurements, I will get them the next time I'm with mine. However I do not know how long that will be

And yeah, that's the chap. Here's a link... Things have slowed down a little recently, a big bit of metal fell on the girlfriend's mini so I've been fiddling with that recently, new screen, bashing out the scuttle panel... blah blah blah... But I've got to start dividing my time up a bit I think, so one evening a week will be van, the other will be Mini.

Here's a link...

http://www.volkszone.com/VZi/showthread.php?t=668144" onclick="window.open(this.href);return false;

Ah yeah, I remember reading about your GF's car with the Cricket-board thingy on VZi. :roll:

Your bus is immense considering what you started with! :shock: Great job. Really makes me think I am very slow with projects to think yours is nearly on the road :lol: :| :sad0049:

The quality of the work is varied to be honest. It's my first restoration and while everything is solid and safe, there are some ugly bits. I don't mind really, it shows how far I've come.

Mine is similar. It would not win any concourse awards, there is some patchy work, but it is solid for a UK bus and ready to be used properly, when I ever finish it. :?

 

[Happystamps]

Very kind bud, thank you unless someone else pipes in, I'd be very grateful of that measurement.

Ta

Simon

 

[cunning plan]

Hole Diameter: 22mm

Edge to edge width: 91.48mm

 

[Happystamps]

Amazing! Thank you so much!



Si

 

[cunning plan]

You're welcome! :shadey: