Progressive Weber Throttle Problem!

[gazmidas]

Afternoon,

I have seen many threads on here and elsewhere to confirm that I am not the only one with throttle cable issues with my progressive Weber. However, I cannot see a confirmed fix for the problem. So my question is, whats the best fix?

I basically have the cable coming out of the housing at a tight angle onto the carb. The pivot that holds the cable also moves too far and jams again the mechanism causing "cruise control" or more like lack of control... Then the pedal wont allow full throttle. So basically it all needs re-working!

My pedal mechanism has been replaced fairly recently so has limited slop, so its just the engine side that needs to be changed. Can anyone confirm if the below kit will resolve all my issues? Or advise how to modify / fabricate some brackets and pivots to fix the problem?

https://www.vwheritage.com/shop/bay...weber-32-36/?crumbStartPage=1&crumbStartRow=1

Gareth

 

[radish]

I used one on my old bus and it came with that type of linkage, it worked fine. It was setting the carb up which was a bastard.

 

[RePhil]

I have this kit on mine too & it all works fine.

Phil.

PS I guess you can update your profile now you seem to have a bus

 

[gazmidas]

Profile Change Done! I will get one of the kits ordered up today

Thanks for your help.

I have this kit on mine too & it all works fine.

Phil.

PS I guess you can update your profile now you seem to have a bus