Remove cover sliding door rail

[Michael Björk]

I am trying to remove the cover over the guide rail but can’t seem to figure out how..
It’s a 1975, and I have gotten rid of the 2 screws I have found.
One at the back end and one in the stopper for the door.
Is that it? Can’t see anything else,but it doesn’t move.

 

[67panel]

Bolt at the front through the door post and does this one have the tension rail that needs to be slackened?

 

[davidoft]

piece of wood under the edge and knock up starting at the back, needs to be at aproxx 45degree angle to come off

 

[Michael Björk]

Bolt at the front through the door post and does this one have the tension rail that needs to be slackened?

Dont know?
Cant see where that bolt would be?
There is a tiny hole on the inside, but I can’t see if there is anything in it.

Do you have any pictures?

Thanks!!

 

[davidoft]

Dont know?
Cant see where that bolt would be?
There is a tiny hole on the inside, but I can’t see if there is anything in it.

Do you have any pictures?

Thanks!!

looks like a late bay from the filler cap , it wont have either

 

[james_stan]

Is it not just jammed in by the seal now?

 

[Michael Björk]

piece of wood under the edge and knock up starting at the back, needs to be at aproxx 45degree angle to come off

Worked finally. Just had to find the right spots to hit. Thanks everyone for chipping in!!

 

[ozziedog]

Lol, works every time just about ! Nudge nudge nudge, are you gonna budge

Ozziedog,,,,,,,,,when in doubt, give it a proper clout