STRUGGLING

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

busdiver

Well-known member
Joined
Nov 20, 2012
Messages
367
Reaction score
0
Location
in the middle
To find an "A" post repair section for the bus,

I cannot find one so maybe not made, I need the very bottom of the A post that the step front edge welds to and on the other side the front panel, only really need the bottom 3 inches or so as mine are a bit thin and holey.

a bit complicated to fabricate as it not only has lots of folding but also curves in at the base.

anyone got any ideas... :idea: please
 
cheers sparky, emails sent.

i see you went down the body cut route for your steps/A post sadly nobody seems to have any early steps-arches in, i only looked at body cut arches/steps when i got my klekkershite panels in the post and saw how bad they were, but at the price body cut ones are might have to stick with them. :?
 
Which side do you need? I'm pretty sure I have a LHS one left over from a dogleg cut that I unpicked - i'll check and take photos for you when i get home tomorrow night.

Andy
 
cheers fellas i really need both sides the area from the step platform up is nice and solid it's just the bottom couple of inches as you can see below. cannot believe that nobody makes this piece you can get the whole post from the ground upto the windscreen but mine is absolutely solid so a waste of cash and metal.

[photobucket]
P1012339.jpg
[/photobucket]
[photobucket]
P1012338.jpg
[/photobucket]

this is the backside of the nearside step is gone and front inner panel section just left with the square post area you can see outlined at the bottom
[photobucket]
i1092.jpg
[/photobucket]
 
thanks shorty, thought wales had suddenly got there own timezone looking at the post time, then see mine is the same an hour ahead. whats appening mods..
 
busdiver said:
thanks shorty, thought wales had suddenly got there own timezone looking at the post time, then see mine is the same an hour ahead. whats appening mods..


You need to set your time in the user control panel.
Profile
board preferences
summertime/dst is NOT in effect.
 
Does anyone have a photo of the bottom of the A Post that they have repaired? Or even just a complete one where someone was doing work and this was exposed? I need to remake the bottoms of mine so just want and idea of what it should look like.

Or is this more or less it?
P1012338.jpg


Thanks.
 
MADE THESE BEFORE NOW,just needs a bit of patiance .only tools I had were planishing hammer ,dollys and a vice/angle iron.you will also need to make the "pear"shaped filler that goes from piller to front panel.cardboard templates help see if ou can have a look at an OG bus for shapes and joins.with you on why no one makes a repair section and the pillers that you can get are brazilian so are differant shape.
 

Latest posts

Top