6” fuch fitment

[Bobreoc]

Hi guys.

Has anybody fitted 6” fuch on the rear of there bay (71) i would like to not have to fit adapters or spacers (to run centre cap)

 

[Heebee_GB]

http://transporterhaus.de/index.php/product/porsche-130-pcd-rear-hub/

Would these work?

 

[radish]

With a 71 you can redrill your hubs and drums to 5x130pcd and they should fit. Find a machinist with a pillar drill with turntable and they should do it for less than £50
Hub caps won't fit though but a machinist can trim 20-25mm off the snout of the drive shafts and then the will.

Fuchs are ET45 I think same as comics which I run. I use to run 6" teledials which are ET52.3

Cheers Darius

 

[mychatype3]

I run old Fuchs (6J Et36) the work only if you convert 5x112 hubs to 5x130 as Darius stated