72 Sierrayellow Westy

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
mike202 said:
Like the pics of the show in the Alps 8)

I got good rear bumper splash pans from Schofields. They make them and they fit well.

Thanks for your answer! I had to modified the right one, but now they suits well!

Cheers
Reto
 
Hi everybody!

A few weeks ago there was the beautiful meeting at Chateau d'Oex in Switzerland. The weather was perfect, so we headed off on saturday morning in direction of the alps.

The theme of the meeting was, "Let's Rock!". So there were playing different bands the whole weekend long f...ing great music!

Some impressions from the meeting...

P8293788_zpserupr1ba.jpg


P8293778_zpserjjt9va.jpg


P8293799_zpsovz5fgf5.jpg


P8293800_zpsbaogbxlp.jpg


P8293812_zps39fabzey.jpg


P8293820_zps2bsamhek.jpg


P8293838_zps4zdnpvfv.jpg


P8293844_zpsgf2hqrxg.jpg


P8293845_zpspudocleb.jpg


P8293859_zpscg0n2dkc.jpg


There were around 1400 aircooled cars from all over europe! Very cool!

On saturday evening we had party all night long with some good friends! We had definitely a few beers and tequilas too much! ;) :lol:

Sunday morning.... :roll: :lol:
P8303872_zps5dvfc9gw.jpg


And why??? I was chosen from the jury in to the "Top 15" with my beetle! I'm very, very proud of that! :D

Some pics from the presentation on sunday afternoon...

P8303898_zpsaly6hz9n.jpg


P8303885_zpska0tzu4i.jpg


P8303901_zpsl0n9edv1.jpg


If you ever have the possibility to go to Chateau d'Oex, DO IT! You will not be disappointed!

Best regards
Reto
 
Between all the work, learning for school and had hard partys at Chateau d'Oex :lol: , I found some time to work on the westy!

Here some progress I did...

The front beam is finally blasted and powder coated!

Sandblasted...
Kopie%20von%20P8223771_zpsqf5uxkkw.jpg


and powder coated!
P9053286_zpsh4xklwuj.jpg


P9053288_zpsvfezq9hr.jpg


I've also mounted the rear bumper on the bus. Looks good without the right over rider... Doesn't fit like I want that! :evil:
P9053269_zpstru3ydl4.jpg


Look at the right one!!! That's ****! :oops:
P9053273_zpsduluralc.jpg


I will spend some more time on the right over rider to look like it should be.

I also begun with the rewiring. I installed a second wiring loom from front to back which include oil pressure, oil temperature, rpm and the rear speakers. For the rear speakers I used a special cable which is shielded. I hope I will not have any problems from the rpm signal on my rear speakers!

P9053268_zpsqtmi4lhd.jpg


P9053267_zpspeaqe7e4.jpg


And on the front I installed the butty bits throttle kit. Very nice!
P9053262_zpsuxdsvu6i.jpg


Best regards
Reto
 
Hi all!

Sadly I've not too much time to work on the bus. First priority is my education at the moment. But I use every free second to do some stuff!
Last week I good some yellow headlights from a guy from Austria. What do you think, will they suit the bus or not? I'm not sure for the moment....

PA043260_zpsjynrxzsl.jpg


PA043261_zpsvgjlxtov.jpg


Sierrayellow with yellow headlights!? Go or no go?

Best regards
Reto
 
Hi everybody!
Since the last few weeks I made no big steps forward on my bay. But when I had some free time I went to the garage to do some small things.

Here we go....

Start to rebuild the frontbeam
P9053286_zpsuyv9s7o6.jpg


P9053288_zpsvfezq9hr.jpg


PB083290_zpsp6b9uoix.jpg


PB083298_zpsorlmleer.jpg


PB083300_zpspbkil2g8.jpg


Also the rear suspension found the way back on the bus. For the moment I mount the original spring plates one spline down. Will see how it looks...
PA313262_zpsd9xybaf0.jpg


PA313268_zps4qlbndgm.jpg


PA313272_zpsz5nab7dw.jpg


Then I started with the installation of the brake lines. Not finished yet...
PB143322_zpsqpph25pz.jpg


PB143320_zpsbwicp6x8.jpg


The braking force regulator got some overhauling. It was full of mud! So cleaned everything and painted in black.
PB143319_zpsfnmhdtj3.jpg


PB143319_zpsfnmhdtj3.jpg


And finally some inspiration! ;) :D

PB143338_zpsfmmfhbyy.jpg


Next saturday I will spend the whole day on the bus. Hope I can do some big steps forward!

Regards
Reto
 
squareweave said:
Reto, nice work on the detail!!!

I can't wait to see this on all four wheels and a motor!!

Keep up the top quality work........ it shows

+1

Loving the cleanliness of the underneath :lol:

What I am aiming for :mrgreen:
 
Thanks guys! :) I'm still waiting for my modified vintage autohaus dropped spindles and my laser cutted brake dust sheets. Hope I will get them at the beginning of 2016! Till then I have a lot of other things to do!

Now I need your help guys! Has the wheel hub from the crossover baywindow (1972) the same dimension like the later ones after 1973? Is it possible to mount a disc brake from the late bay on a crossover bay? I know that the calipers and disc brakes were different. The only important thing for me is the compatibility from the wheel hub from my crossover with a disc break from a late bay. And I'm not sure about the compatibility... :?

Thanks for your help and have a nice evening!

Best regards
Reto
 
Hi everybody!

Only small update...
Fuel tank is in!
PC123269_zpsrlhelqbh.jpg


PC123270_zpsjw03zzal.jpg


More work will be done in the next two weeks!

And I got my personally christmas present! :D :D
PC203274_zpswmmu4598.jpg


Wish you all a nice christmas time!
Regards
Reto
 

Latest posts

Top