I'm just after fitting my adjustable springplates 2 days ago. When refitting the springplate cover one of the 15mm bolts went in at an angle, after a turn I realised this and unscrewed the bolt but I think I've messed up the first few threads in the bolt hole as it stripped the bolt when I tried again, I take it I'll have to tap the hole again? Any advice on doing this?
Also when I fitted the plates I moved them up one outer spline, one side is maybe 1 mm above the metal stop whilst the other side is around 9mm above the stop. I've rechecked both sides and they are definitely rotated one spline, I've managed to level the rear using the adjusters anyway but I'm wondering if this 8mm difference is out of the ordinary?
Thanks!
Also when I fitted the plates I moved them up one outer spline, one side is maybe 1 mm above the metal stop whilst the other side is around 9mm above the stop. I've rechecked both sides and they are definitely rotated one spline, I've managed to level the rear using the adjusters anyway but I'm wondering if this 8mm difference is out of the ordinary?
Thanks!