ATTN: Mr Scoops -Missing in Action-Urgent Appeal

[ozziedog]

Ha Ha , But to be fair, that wasn`t meant to do that job now was it. You`ll notice my little effort has a cut out, firstly you need that to get it on, but secondly you can still clout the arm. Pull the puller on and tighten it up till it`s firm and give it another quarter of a turn, give the arm a clout, a good solid clout or two, tighten the puller another flat, then clout again directly onto the arm and just keep going, the arm should give in first, if it don`t, :shock: :shock: :shock: then post it back to me and I`ll make it twice as strong, but you shouldn`t have too much of a problem. If you can`t get to give it a decent clout, try using a bar and a lump hammer, like you`re useing a hammer and chisel, if you can get a bit of distance away then you should be able to get a decent swing and give it some rice :lol: Where`s that bloody MerlyDog when there`s hammerin talk goin on ???

Ozziedog,,,,,,,,,,,, Just don`t be shy with it :lol: :lol: :lol:

 

[Dude]

Ha Ha , But to be fair, that wasn`t meant to do that job now was it. You`ll notice my little effort has a cut out, firstly you need that to get it on, but secondly you can still clout the arm. Pull the puller on and tighten it up till it`s firm and give it another quarter of a turn, give the arm a clout, a good solid clout or two, tighten the puller another flat, then clout again directly onto the arm and just keep going, the arm should give in first, if it don`t, :shock: :shock: :shock: then post it back to me and I`ll make it twice as strong, but you shouldn`t have too much of a problem. If you can`t get to give it a decent clout, try using a bar and a lump hammer, like you`re useing a hammer and chisel, if you can get a bit of distance away then you should be able to get a decent swing and give it some rice :lol: Where`s that bloody MerlyDog when there`s hammerin talk goin on ???

Ozziedog,,,,,,,,,,,, Just don`t be shy with it :lol: :lol: :lol:

i know so impatient :? ok i shall wait until mr scoops sends it over to me and give it a go .

thanks for getting back to me

dude

 

[bluenose]

seriously they are like a fiver off ebay!

 

[butty]

I think the loading it and beating the arm is the way to go , or loading it and leaving it loaded over night . That tool was one of the pretty thick jobbies , nice job on it . Shame it didnt work for you , but atleast you have the second thinner one for the steering wheel , good luck with it .

 

[mr scoops]

Dude, got the van back today, I'll get the Mrs to wrap it and post it.

 

[Dude]

Dude, got the van back today, I'll get the Mrs to wrap it and post it.

Thanks dude pm me the costs when your ready

I'm Really looking forward to getting it :lol:

Cheers

 

[Dude]

I think the loading it and beating the arm is the way to go , or loading it and leaving it loaded over night . That tool was one of the pretty thick jobbies , nice job on it . Shame it didnt work for you , but atleast you have the second thinner one for the steering wheel , good luck with it .

Thanks for the extra one butty your a diamond .

I guess we have the answer to our conversation on Sunday dude :?

Worth a try though :lol:
Cheers

 

[mr scoops]

Well Dude & OzzieDog.
I hope you're both sat down.
I have, (well actually Mrs Scoops has but whatever), has posted the puller today to Sunny Lancashire First Class!

 

[Dude]

Well Dude & OzzieDog.
I hope you're both sat down.
I have, (well actually Mrs Scoops has but whatever), has posted the puller today to Sunny Lancashire First Class!

Yesssssssss !!!!!! Well done Mrs scoops . I am one happy dude

Thanks a lot mr and mrs scoops

I will let you know how it goes .. :?

 

[ozziedog]

Snigger snigger :lol: chortle chortle :lol: Now that did make me laugh :mrgreen:

Ozziedog,,,,,,,,,,,,,, F :mrgreen:Fresh back from the pub :mrgreen: :mrgreen:

 

[Dude]

OMGGGGGGGGG ! arty0009: arty0049: :bliss: arty0010: arty0006: arty0009:

ozziedog,,,,,,,,,, your a bloody genius !!!!!! its offffffff !!!!!

I could not believe it !!!!!!!!! i slipped the tool around the arm and shaft then started to tighten it and all of a sudden it went slack ...so i thought ohhh **** !!! i have threaded the bolt , BUT NO OOOHHHHHH NO !!!!!! it was the arm slipping off the shaft nice and easssssssyyyyy !!

now i can finally get to recon this box ... Happy Days :bliss:

ozziedog,,,,,,,, i owe you one arty0047:

mr scoops thank you for help and posting out to me, total star !!!!

Cheers guys

 

[68_early_bay]

OMGGGGGGGGG ! arty0009: arty0049: :bliss: arty0010: arty0006: arty0009:

ozziedog,,,,,,,,,, your a bloody genius !!!!!! its offffffff !!!!!

I could not believe it !!!!!!!!! i slipped the tool around the arm and shaft then started to tighten it and all of a sudden it went slack ...so i thought ohhh **** !!! i have threaded the bolt , BUT NO OOOHHHHHH NO !!!!!! it was the arm slipping off the shaft nice and easssssssyyyyy !!

now i can finally get to recon this box ... Happy Days :bliss:

ozziedog,,,,,,,, i owe you one arty0047:

mr scoops thank you for help and posting out to me, total star !!!!

Cheers guys

It's like a line from a dodgy 70's porno :msn4: :lol:

 

[Dude]

OMGGGGGGGGG ! arty0009: arty0049: :bliss: arty0010: arty0006: arty0009:

ozziedog,,,,,,,,,, your a bloody genius !!!!!! its offffffff !!!!!

I could not believe it !!!!!!!!! i slipped the tool around the arm and shaft then started to tighten it and all of a sudden it went slack ...so i thought ohhh **** !!! i have threaded the bolt , BUT NO OOOHHHHHH NO !!!!!! it was the arm slipping off the shaft nice and easssssssyyyyy !!

now i can finally get to recon this box ... Happy Days :bliss:

ozziedog,,,,,,,, i owe you one arty0047:

mr scoops thank you for help and posting out to me, total star !!!!

Cheers guys

It's like a line from a dodgy 70's porno :msn4: :lol:

to be honest getting that arm off was probably just as good as a 70s porno :lol:

 

[mr scoops]

Glad it worked out for you Dude, you have got to make that line your signature!