Carbon/charcoal canister help

[Simshaz]

Hi
I have just finished getting my US Import Bus ready for the MOT (which it passed) and during the engine rebuild i fitted twin 34 ICT carbs. The charcoal canister was never on the Bus when i got it and i just have the 2 metal pipes that run over the top of the engine, but i see they are open from the fuel tank.
So
As i have no way of plugging them into the air filter or a canister just the 2 pipes what do i do.
Do i fit one from another vehicle somehow
Do i T the feeds together and run a pipe under the bus to vent off

 

[72baywesty]

Connect the two vent pipes to the top of the rh filter. I used plumbing fittings to make an adapter up. You should also have a crankcase breather (on the side of the oil filler) this needs venting as well

 

[Simshaz]

Thanks, have found some one way breather valves that also may work, designed for motorbikes so fuel compatible
If a fail will need to drill the new filter and fit a feed as you direct