Early bay Overiders

[Araon]

quite right the rubbers have captivated bolts...
and have a steel former encased within the rubber...
Plenty of places sell replicas, it may be worth selling with the rubbers and if you buy bulk get a decent discount....

 

[ddffrost]

he's not got back to me yet maybe thats why!

see what he says i guess

 

[ground hugger]

No worries
Ill keep an eye on this one see what you come up with :wink:

 

[ddffrost]

keep you informed

got the hinges to get out first though only taken 6 months so far lol

 

[Araon]

Think you might have a winner with this one....

they are simple in design and with 4 holes cant be easier...the tooling is likely to be the expensive bit if you go that route....

though I suspect you'll probably go for a sheet pattern folded and seam welded....

will you be providingthe urethane spacers for themounting bolts too?

 

[ddffrost]

yer i'll look into putting the whole thing together with rubbers to so you just have to bolt them on.

although the set i have dosent have any bolts with it if anyone has any going spare drop me a pm i'll get em back to you or buy em off you.

 

[ground hugger]

You want a coach bolt and nut with washer 65mm long
and a piece of tubing 35mm long to slide over the bolt between the overider and bumper so it doesn't pull the overider in when you tighten it up :wink:

 

[Joval]

Think you might have a winner with this one....

they are simple in design and with 4 holes cant be easier...the tooling is likely to be the expensive bit if you go that route....

though I suspect you'll probably go for a sheet pattern folded and seam welded....

will you be providingthe urethane spacers for themounting bolts too?

Mine have 5 holes - 3 for the rubbers and two square for the coach bolts (1 in from underneath) . Steel spacers too.

 

[ddffrost]

nice wheels there dude

 

[ground hugger]

Hi Looking at your z hinges idea and now overiders
would you be interested in an idea I have ,just can't get round to making it yet "give you a clue ,youve just lowered your van 2 outer splines and you can't get the wheel on and want to run standard height tyres,out comes the big bar y swing on it with one hand and try getting the wheel on with the other,F^$K THAT and you knock it back down a spline because youve bent all your wheel arch and scratched your paint and you you cant be arsed to do that again,Especialy on the motorway swinging a great bar around in the first lane pissing it down with rain :lol: :lol: Adjustable spring plates £150.00 want some thing cheeper and want the 2 spline drop :lol: sounds good so far "Im even interested in it me sen and I know what it is" :lol: :lol: :wink: And its a one man job give me a pm if your interested
Dave
PS dont tell any one untill youve made one "y can make me one for the idea" :mrgreen:

 

[Araon]

Joval your probably right thinking about it...been a while since I got shot of mine.....

 

[Joval]

:wink:

 

[ddffrost]

If all else fails i'll have a set of 4 for sale without rubbers

 

[ddffrost]

Hi all,

Ok he's got back to me and the initial cost of tooling is quite high.

If we could get 15ish people in we could make it happen depending on price per set.

Is £150 to much for a set of 4 brand new?

Dave

 

[andyandvic]

Will £150 include rubbers, coach bolts & p&p for 2 pairs (2 front & 2 back).

 

[Guest]

Will £150 include rubbers, coach bolts & p&p for 2 pairs (2 front & 2 back).

even without this its still a bargain. Does Carole still have overrider rubber in stock?

 

[theblade]

Hi,

Do you have any over riders for sale???? I have been offered some from the US for around $200.00 but not in tip top condition.

Please let me know if you have enough people and I will purchase some at £150.

Cheers.