Busboy1971
Well-known member
Hello,
Still having issues with me van. (rear crankshaft oilseal broke and more problems occured from there) Got the engine back in after fitting the new fan. Now the engine turns over a treat but will not fire up, i have had the dizzy cap off and with the ignition on checked the points to see if a little spark would appear, nothing! I had this problem before thinking it could be a coil fault but after playing with tht ewires i manged to get it running, doesnt work this time. There is fuel getting through. I have attached pics to make sure that all the wires are on the coil correct, 2 from the negative side, 1 to the dizzy and 1 to the wiring loom. Also 2 from the live side, 1 to the transducer thing on the left side of the carb, 1 going to the wiring loom.
Can any one help, i know its hard to diagnose over the internet.
Thanks in advance
Busboy1971
Still having issues with me van. (rear crankshaft oilseal broke and more problems occured from there) Got the engine back in after fitting the new fan. Now the engine turns over a treat but will not fire up, i have had the dizzy cap off and with the ignition on checked the points to see if a little spark would appear, nothing! I had this problem before thinking it could be a coil fault but after playing with tht ewires i manged to get it running, doesnt work this time. There is fuel getting through. I have attached pics to make sure that all the wires are on the coil correct, 2 from the negative side, 1 to the dizzy and 1 to the wiring loom. Also 2 from the live side, 1 to the transducer thing on the left side of the carb, 1 going to the wiring loom.
Can any one help, i know its hard to diagnose over the internet.
Thanks in advance
Busboy1971