Help on fitting servo to my 1969 bus

[Rich Martin]

Hello ' I'm looking for a bit of help fitting servo to my 1969 bus . I've just fitted a t2d beam and the servo from vw heritage . Looking for help on connecting the pedal to the servo ! Can I get some sort of push rod. ?

 

[paul_q]

this might help if your chassis is the same,

 

[Rich Martin]

this might help if your chassis is the same,

Mines not the same as that but that looks like the sort of thing I need . Wot years your bus ? Cheers mate

 

[paul_q]

if yours is lhd it should be a lot easier. this is not my van, I took the photo for reference. my van is a 68 rhd with a retro fitted servo. the pedal is the wrong side of the beam so you have to do something like this thats on a new bay with a rhd conversion





if your pedal is the right side of the beam you might need something like this

 

[Rich Martin]

Yep mines a lhd so it looks like I need to make something ' I don't think you can buy one ! Thanks for the photos ' cheers :roll:

 

[paul_q]

your should just need a straight bar then, creative engineering do a complete kit for a split. I would ask them if they can sell you just the bar. it will probably be nearer to what you need.

 

[Rich Martin]

Nice one I'll give them a call ,