Microbus owners - middle seat info

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MMMC

Well-known member
Joined
Feb 2, 2007
Messages
636
Reaction score
0
Location
Leeds
I have a microbus with a 3/4 middle seat and I'm not convinced the seat is mounted correctly. Has anyone got photographs or information on how their middle seat is secured to the bus. I have the special plates to connect the seat to the bus but the seat dosn't seem to line up properly. At the moment the seat has been secured using bolts and butterfly nuts.

cheers in advance
 
I think you should have T head like bolts which hook in the floor plate and clamps which pull down onto the top of the seat frame, the frames have dimples to locate cast in lumps in the clamps. 2 frames are on the left of the bolts and 2 are on the right so will not all line up if you are bolting through the frames, these pics are for full width centre seat with a folding back on the seat next to the door.
100_1380.jpg
[/img]
100_1379.jpg
[/img]
 
yep the photo's look like what I should have - I will take a picture of what I have but it looks as though mine has been changed at some point throughout its life....unless the shorter 3/4 middle seat secures differently?
 
a link to this site was posted on another thread
had a look around and spotted these

http://www.evamclassic.com/en/enshop.php

They look the same as pics in ronmidg van

Terry
 

Latest posts

Top