Going to drop the engine over winter. Haven’t done it in a while. What size is the D bolt top right of engine? The one that goes through starter motor. Also any tips on removal? Open spanner docket etc. Cheers
Remove engine D bolt
- Thread starter thejinx
- Start date
Help Support Early Bay Forum:
72baywesty
Well-known member
- Joined
- Jun 26, 2012
- Messages
- 220
- Reaction score
- 0
17mm(I think) I use a ratcheting spanner and next door neighbours arm as mine won't fit past the carb. Also find it helps if you hold the bolt in place from underneath especially when tightening
- Joined
- Apr 22, 2012
- Messages
- 2,285
- Reaction score
- 321
- Location
- Dorset
- Year of Your Van(s)
- 1971
- Van Type
- Dormobile
Give Stuf a shout , he has a method that makes life easier.
J & P
J & P
K@rlos
Well-known member
- Joined
- Sep 8, 2008
- Messages
- 5,348
- Reaction score
- 1,300
- Location
- Woodbridge, Suffolk
- Year of Your Van(s)
- 1970
- Van Type
- Westfalia pop-top
gas1man said:
17mm ratchet spanner, can't get much easier lol.
The van is in work at the moment so nip out to the garage and snatch a quick half hour now and then. Disconnected wiring and removed flexi hoses from heat exchangers. Undone bolt top right of engine as you look at it. Going to remove other 3 bolts fri afternoon and clamp fuel lines. Job done
