Servo pipes, where do they go?

[charlie34]

I've got a servo now to go on my 69 bus, but as there wasn't one to come off I have no idea where it all goes.

The vac hose runs to the manifold with a non return valve, but does it matter where the valve goes and way around (yellow to servo side?).

As for the breather, I have no idea where this goes. Does the it connect to something?

Any help is appreciated. Cheers

Dan


Sent from my iPad using Tapatalk

 

[Yorkieman]

I believe if you have a new Brazilian servo that they have a non return valve fitted in the servo so don't need an external one. The breather goes forward under the cab area and just is open to air. I have just fitted one to mine but, am not quite at the stage to drive it and check all the servo works, still that joy to come!

 

[Trikky2]

The breather pipe originally went into a hole in the body. If you don't have this then run the pipe up, away from any possible water ingress and fit a small filter on the end to keep dust out.

 

[Yorkieman]

The breather pipe originally went into a hole in the body. If you don't have this then run the pipe up, away from any possible water ingress and fit a small filter on the end to keep dust out.

Quite like the ide of a filter and I have one that will do the job!

 

[charlie34]

Cheers guys. That makes much more sense of the job. Just need to find someone who has the pipe in stock now as it seems to be unavailable everywhere at the moment.


Sent from my iPad using Tapatalk