Throttle spindle bushes

[dustrat]

Any one know where I can get some throttle spindle bushes for Solex 34 PICT 3 carb. There was someone on ebay selling them for 31's in Germany and have tried to contact him but no reply. Got to be for Solex not Bocar.
Robert

 

[Webbaldo]

Any good bob?

http://www.ebay.co.uk/itm/370597327209?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT" onclick="window.open(this.href);return false;

 

[dustrat]

Thanks Mark. Spoke to the guy on phone and he is sending me a couple of sets.
Robert

 

[dustrat]

Bushes arrived and fit OK. I also have a couple of Bocar 34Pict carbs and would like to get bushes for these. The supplier that I got Solex bushes off does not do them for Bocar carbs, any sugestions anyone :?:
Robert

 

[Fortunate Son]

Try these-

http://simplybearings.co.uk/shop/Products-Bronze+and+Wrapped+Steel+Bushes/c4747_5234/index.html" onclick="window.open(this.href);return false;

http://www.bearingboys.co.uk/Bearings-1005-c" onclick="window.open(this.href);return false;

 

[Evo1972]

Sorry to hijack this thread but I have just done this to a Solex 34 PICT 3.

However two came in the pack but I only needed one (for the fuel pump side).

The arm on the opposite side had a longer bush that seemed to be part of the pivoting arm.

Does this seem correct or am I missing something here?

 

[dustrat]

When I replaced bushes both were same size and length. Something wrong some where. It is always advisable to change both bushes. Thanks for tip Fortunate Son but have found a local firm who will make some for £5.
Robert.