Under seal

[Hodge]

Anybody used this stuff before. I’ve been recommended it and it seems to have good reviews.

 

[sparkywig]

Shultz is Shultz. As long as it's clean, dry and grease free before you spray it'll be fine.

 

[67panel]

I prefer stone chip,

 

[Gabs]

I used this product once I treated the areas under my bus with a rust gel. hammerite Worked well and was a wax oil mix. Stone chip is ok but not long lasting. Another product is Dinitrol which is a very good product through a gun. Have a look at some reviews.

 

[Hodge]

Cheers I’ll have a look.
Looking for something to protect it but don’t want it to look like it’s been coated thick with under seal.
Is it best to etch primer it first?

 

[redgaz54]

Cheers I’ll have a look.
Looking for something to protect it but don’t want it to look like it’s been coated thick with under seal.
Is it best to etch primer it first?

I like the Bilt Hamper products, easiest and best stuff I've ever used.

 

[pgtips]

x2 bilt hamber, I found this stuff a few years ago and really like it/used it ever since.

https://bilthamber.com/product/dynax-s50/

 

[cov1967]

https://www.frost.co.uk/brands/por-...bpHw6F2CSf6v-e2QcIPLRHquH_81KHNoaAkA0EALw_wcB

I used POR 15 on the underside of my bus, lots of prep work but the finish and protection is outstanding

 

[Hodge]

Thanks for the recommendations I’ll have a look into them. I’ve got a mix of new metal and old. I’m in the process of removing all old underseal and rubbing down any surface rust.
Am I still best of putting a primer on first or will most of this stuff not require a primer. I like the idea of doing it body colour underneath but not sure the best way to go about that.

 

[cov1967]

Same situation, old and new metal to protect,I can only say what I did.
I bought a set from Frost’s, once all the gunk was removed from the underside there was a degreaser, a metal prep and then the final coat

 

[Ben72Bay]

I pressure washed the underside of mine then covered it in Lanoguard.
Seems ok

 

[AircooledKate]

I pressure washed the underside of mine then covered it in Lanoguard.
Seems ok

How did you get on with it? I’ve got some but haven’t got around to using it yet.

 

[Ben72Bay]

How did you get on with it? I’ve got some but haven’t got around to using it yet.

very easy to apply once I bought a different spray bottle. Here's the one I used:
https://amzn.eu/d/32UQ7Zi

the one it came with kept blocking up.

I cleaned the underneath of the bus with one of these first:
https://amzn.eu/d/dHD3hBp
and bought this for it to work with my Karcher:
https://amzn.eu/d/509GGdu

 

[col1600]

Heres my process.

Old underseal off
Epoxy prime
Seam seal
Stone chip
2k paint.

 

[AircooledKate]

Fab, thanks for that, I’ve got to do the bus and the beetle. I’ll maybe grab those first then. Great tips.

very easy to apply once I bought a different spray bottle. Here's the one I used:
https://amzn.eu/d/32UQ7Zi

the one it came with kept blocking up.

I cleaned the underneath of the bus with one of these first:
https://amzn.eu/d/dHD3hBp
and bought this for it to work with my Karcher:
https://amzn.eu/d/509GGdu

 

[Hodge]

Heres my process.

Old underseal off
Epoxy prime
Seam seal
Stone chip
2k paint.

Looks nice that