what do ya think?

[Benyon]

I started off not liking, then when I realised it was the mebpco single cab and I think it would look the mutts, tho deff have to widened!

 

[panchocrossover]

i like, looks hard as f$%k! go with it!!

 

[Guest]

its growing on me and its not something you see in the Uk much either.

 

[Grazy]

Its a ratty commercial so you can throw things like this on and get away with it DO IT son 8)

 

[the councillor]

putting the old 'kid killer' argument to one side for a moment :?

they look like they were designed to go on a completely different vehicle altogether (which i guess they were) they don't look wide enough, they (partially) obscure the indicators, and they just don't 'flow' with the rest of the front of the vehicle, which looks plenty cool enough without them to be honest 8)

 

[Clem]

putting the old 'kid killer' argument to one side for a moment :?

Pah. Political correctness gone mad. Did you hear the Cameron speech the other day? Hes going to outlaw all that Brussels nonsense when he gets in. :wink:

I really dont think those bars add anything to the lucious front end of that early on the floor. 8)

 

[the councillor]

Pah. Political correctness gone mad.

think of the mentalists' feelings for once you heartless swine :evil:

 

[strongy]

leave it of,it will look like you have stuck some artdecor railings on ya bus

 

[smudge]

I started off not liking, then when I realised it was the mebpco single cab and I think it would look the mutts, tho deff have to widened!

8)

But its a 'W' not an m :wink:

 

[smudge]

Do you mean the ones that go thu the trailing arms and hold the link pins in place?

Hey Rickki..can you help me please?

M8 shoulder bolts for trailings arms to spindles...what length and where from?

no mate....one end of the arm is on the leaves..the other end is where the spindles go through..I was told that you use m8 sholdered bolts to 'pinch' them together which clamps the spindles..make sence? :lol:

 

[clyde]

I like alot ......................do it.

 

[Pete B]

Hey Rickki..can you help me please?

M8 shoulder bolts for trailings arms to spindles...what length and where from?

Don't mean to stick my snout in, but where do you plan to use M8 fixings on a k&l beam? I have fitted a k&l beam and all the fixings for the spindles etc are M10. The BOLTS to clamp the trailing arms to the link pins are M10 and need a shoulder long enough to engage with the link pin. As I understand; Bolt; has a plain non threaded section from the head. To have a thread all the way to the head means 'machine screw' . Sorry, but this is important to ensure safety for everyone, a front end falling apart is not a good thing!!! Please please please elaborate on this for the benefit of everyone.

 

[aogrady]

Hi!

Me for one, i am partial to a nice ratty commercial - and as i haven't seen one on a bay B4 - mod the bar and whack it on!

.....and watch everyone else copy the idea.........!

Hard as nail that look, christ knows how low that is, thought someone had nicked the tyres off or summat?!

Alistair

 

[smudge]

Hey Rickki..can you help me please?

M8 shoulder bolts for trailings arms to spindles...what length and where from?

Don't mean to stick my snout in, but where do you plan to use M8 fixings on a k&l beam? I have fitted a k&l beam and all the fixings for the spindles etc are M10. The BOLTS to clamp the trailing arms to the link pins are M10 and need a shoulder long enough to engage with the link pin. As I understand; Bolt; has a plain non threaded section from the head. To have a thread all the way to the head means 'machine screw' . Sorry, but this is important to ensure safety for everyone, a front end falling apart is not a good thing!!! Please please please elaborate on this for the benefit of everyone.

Thanks Mr B..i mate told me they were M8..had a chat with Monkey Spinner who ,like you put me right.If i would have got M8's i would have changed then straight away..Thank for saving me the time of looking for the wrong size 8)

 

[smudge]

Hi!

Me for one, i am partial to a nice ratty commercial - and as i haven't seen one on a bay B4 - mod the bar and whack it on!

.....and watch everyone else copy the idea.........!

Hard as nail that look, christ knows how low that is, thought someone had nicked the tyres off or summat?!

Alistair

8)
Alot have said mod it so ill look into what it would need to get the indicaters to fit within the bars.Looking at it,theres nont much more i can add as it throws the head lights out..

As Rikkie says, its not perminant so its going on 8)

 

[ground hugger]

How adout something like this^^^^^^

 

[smudge]

it looks like a smiley mouth :lol:

Think its going to be something like that tho as i can only widen by 2" or the lights are out 8)