Which Brake Servo

[gagvanman]

I want to fit a brake servo to my 71 Doormobile, but it looks like the handbrake cable will be fouled by the standard size one for that model.
Has anyone else had this problem and what size servo have you fitted to get around it?

Thanks

 

[Trikky2]

It's a well known issue.
You can make a 'C' clip that holds the two cables closer together so it just clears the servo.
You may need to slightly slacken the cable adjustment afterwards if the handbrake travel is too short.

In addition you may find you need to use a grinder to reduce the stub on the axle assy if it fouls the other side of the servo.