Rock and Roll beds

HartyaHarty said:

Worth waiting for you reckon?.... There does seem to be a shortage of good alternatives

Click to expand...

ozziedog said:

I’ve had a Rusty Lee bed for over ten years now. I organised it through Delilahs upholstery peeps that you’ll see on here quite a bit . They organised getting the bed, sorting the foam, upholstering the whole shooting match and my front seats covers and door cards too and as anybody that’s seen my bus will tell you it’s a bit of a pickle but the upholstery is bang on still and it’s always been comfy. I’ve got fabric seat and bed base covers with vinyl edges and the same on my cards. Sleeping on breathable fabric is a lot nicer than vinyl or leather especially if you’re a larger person.

Ozziedog,,,,,,,,,,,like me !

Click to expand...

Theworm71 said:

Perfect. That’s the info I was looking for.
Rusty Lee seems to be the one to get. And the original rock and roll bed so they’ve been making them a long time!
Just checked out Delilah’s upholstery. Looks ace. They have a little deal going on atm if you get the whole package through them.

All I need to do now is decide on fabric type and colour.
The more options there are.. the harder it is to choose 😂

Click to expand...

Delilah said:

Yeah, there are so many options, just drop me an email on the website if you need help or swatches 👍

Click to expand...

ozziedog said:

Just finished a little mod to mine

View attachment 8888View attachment 8889

Click to expand...

ozziedog said:

I’d previously had a piece of roofing batten about eight or ten inches long with a notch cut in both ends but I’d knocked it out while searching in there just one time too many and bashed my head into an even uglier shape than it was already. I toyed with the idea of using an electric window motor while in a Stella had one time. However I sobered up and elected to use the KISS formulae on this occasion.

Ozziedog,,,,,,,,K eep I t S imple S tupid

Click to expand...

Theworm71 said:

This got me thinking…
What about a gas strut?? Could use a low resistance one. Something like 100 (N)
It would feel quite satisfying and make a good noise when you open and close it 😂

Click to expand...

Ben72Bay said:

Don’t forget the seat part has to move quite a lot to become the bed

Click to expand...

Theworm71 said:

Ha yea right. I’m commenting on something I’ve never seen in real life or used before 😂
I’ve spent many years as a fabricator so I’m always looking at things and thinking how I can better 🙄

As ozziedog said… K.I.S.S formula

Click to expand...

Walt said:

Hi,

Anyone with a Microbus fitted a Rusty Lee bed?

Just wondering how it works/clears the seat belt mounts when dropping it from seat to bed.

View attachment 8940

Click to expand...

Walt said:

Thanks @Ben72Bay @fallingoffalot @GrahamL

I've now found the fairly recent thread from last year about this aswell...


https://earlybay.com/threads/rock-and-roll-bed-1200-width.81379/#post-636651


So, apart from the upper Seat Belt Mount, is the lower one (mines a rounded edge triangle) also clear of where the bed frame mounts on the wheel arch? I'm guessing this would also need to go as the bed frame looks to fit close to where it's mounted.

And, final question - Does that existing hole (think it's original but not 100%) for the lower seat belt mount line up with the one on the bed frame?

View attachment 8941

Click to expand...

Theworm71 said:

Ha yea right. I’m commenting on something I’ve never seen in real life or used before 😂
I’ve spent many years as a fabricator so I’m always looking at things and thinking how I can better 🙄

As ozziedog said… K.I.S.S formula

Click to expand...