3 point belts in a early bay

[Whit]

I want to fit 3 point belts in the back of my bay is there a easy way of doing this?

 

[niklee1]

Yeah the anchor points should already be there covered by black plastic screws and Screw holes under rear seats.

 

[Whit]

Lap belts are fitted at the moment I don't think mine has the hole in the pillar or did all bays have them ?

 

[BrotherNumberOne]

All kombis and microbuses had them. Panel vans didn't. There should be one in the metal work below the rear side window and also in the metal work between the side windows.

 

[Whit]

Ok I'll check it out what belts have people fitted ?

 

[Whit]

Ok I'll check that which is the best belts to fit? Cheers

 

[bluenose]

Hi,

I've put these ones on my to buy list to do the same as you;

http://www.justkampers.com/211-857-693-c-rear-3-point-seatbelt-with-extender-for-t2-1950-1979.html" onclick="window.open(this.href);return false;

Get them and let me know if there anygood!

 

[Whit]

These holes?

 

[Whit]

I've got these in the pillar in front for the other row of seats

 

[bluenose]

try this thread has a pic on;

http://forum.earlybay.com/viewtopic.php?f=4&t=38843

 

[Whit]

Cheers got it

 

[Whit]

Any other seat belt options ?

Sent from my KFTT using Tapatalk 2

 

[Simmo716]

Any other seat belt options ?

Sent from my KFTT using Tapatalk 2

I've got a 72 converted panel so had to get small plates welded into the rear to anchor the belts onto, only took a couple of hours, only issue was finding a set of longer belts that reached from the back section.

I'll try and dig some photos out later today?

 

[Whit]

Any other seat belt options ?

Sent from my KFTT using Tapatalk 2

I've got a 72 converted panel so had to get small plates welded into the rear to anchor the belts onto, only took a couple of hours, only issue was finding a set of longer belts that reached from the back section.

I'll try and dig some photos out later today?

what make of belts did you use?

 

[Whit]

Any others ?

 

[mrs hoskins]

try putting Securon into ebay, then find KCP Commercials in Bury st Edmonds 01284750777.

I just fitted 2 x 3points (Sec 500 W) and 2 lap belts (Sec 210) for 98 quid. the chap was really helpful

good luck

 

[dodge6x6]

hiya on my microbus did this for mine so they didnt interfere with origional bench seat or spare wheel cover.







shouldnt go anywhere as its 10mm thick plate with a stop welded to it to prevent it moving if any thing happened.

cheers Pete

 

[Marriedblonde]

I bought a complete set from VW heritage. They offer coloured ones so I got some to match my interior.

J.