VeeDubMan
Well-known member
040 twin port cylinder heads - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300737813619&ssPageName=STRK:MESE:IT
These heads were on my 1641cc type 2 engine and working fine, but I was lucky enough to acquire a brand new pair so these are surplus to requirements.
Weber 32/36 Progressive carburettor and manifold - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300737827224&ssPageName=STRK:MESE:IT
This carb was running on my 1641cc type 2 engine before I stripped it down. However, we then moved house and I didn't touch the van for a couple of years. The carb was all bagged up but it looks like some moisture got it as the base (where the large gasket is) is a little corroded as well as one of the 'flaps' and one of the brass looking control plates. With a little elbow grease, this will all clean up and spare parts are available from the likes of Eurocarb.
I have the manifold in a box in the garage too, which will also be included with the sale.
This item was originally purchased from Just Kampers (http://www.justkampers.com/shop/43-0622-0-deluxe-progressive-weber-kit-twin-port-j12147.html) and now retails for £303 pounds! Grab yourself a bargain!
1971 early bay VW camper type 2 steering box - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300737829497&ssPageName=STRK:MESE:IT
Removed from my 1971 early bay as I've now fitted a rack-and-pinion system. Will require some maintenance by the looks of things (seals etc.)
1971 early bay steering arm - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300737831884&ssPageName=STRK:MESE:IT
Removed from my 1971 early bay as I've now fitted a rack-and-pinion system
1971 early bay Pitman arm and drag link - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300737833376&ssPageName=STRK:MESE:IT
Removed from my 1971 early bay as I've now fitted a rack-and-pinion system
1971 early bay lower nearside NS torsion arm - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300737836350&ssPageName=STRK:MESE:IT
Removed from my 1971 early bay as I've now fitted a new set of these.
These heads were on my 1641cc type 2 engine and working fine, but I was lucky enough to acquire a brand new pair so these are surplus to requirements.
Weber 32/36 Progressive carburettor and manifold - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300737827224&ssPageName=STRK:MESE:IT
This carb was running on my 1641cc type 2 engine before I stripped it down. However, we then moved house and I didn't touch the van for a couple of years. The carb was all bagged up but it looks like some moisture got it as the base (where the large gasket is) is a little corroded as well as one of the 'flaps' and one of the brass looking control plates. With a little elbow grease, this will all clean up and spare parts are available from the likes of Eurocarb.
I have the manifold in a box in the garage too, which will also be included with the sale.
This item was originally purchased from Just Kampers (http://www.justkampers.com/shop/43-0622-0-deluxe-progressive-weber-kit-twin-port-j12147.html) and now retails for £303 pounds! Grab yourself a bargain!
1971 early bay VW camper type 2 steering box - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300737829497&ssPageName=STRK:MESE:IT
Removed from my 1971 early bay as I've now fitted a rack-and-pinion system. Will require some maintenance by the looks of things (seals etc.)
1971 early bay steering arm - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300737831884&ssPageName=STRK:MESE:IT
Removed from my 1971 early bay as I've now fitted a rack-and-pinion system
1971 early bay Pitman arm and drag link - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300737833376&ssPageName=STRK:MESE:IT
Removed from my 1971 early bay as I've now fitted a rack-and-pinion system
1971 early bay lower nearside NS torsion arm - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300737836350&ssPageName=STRK:MESE:IT
Removed from my 1971 early bay as I've now fitted a new set of these.