mattp
Well-known member
These are 2 drivers seats and a set of runners so you can run 2 seats in your bus that move back and forth and recline -it's what I did some years ago with my bus as below
The seats have been stripped and checked, there are no bent, broken or missing springs or interlinks, the slider mechs are both free and the backs are also good although not pictured as stored at the back of the garage so a pain to get to. The adjusting bars are included
There were 2 sets of LHD and RHD runners but I lent the mint set to a local engineer who was going to repro them and he's basically stolen them so you'll have to make do with what's left which is almost a full set -it just needs a 'comb' section fabbing and welding to the LHD outer runner. The white ones are RHD the other LHD.
£200
Can post at your cost or collect from Leatherhead (Surrey) = 2min J9/M25
The seats have been stripped and checked, there are no bent, broken or missing springs or interlinks, the slider mechs are both free and the backs are also good although not pictured as stored at the back of the garage so a pain to get to. The adjusting bars are included
There were 2 sets of LHD and RHD runners but I lent the mint set to a local engineer who was going to repro them and he's basically stolen them so you'll have to make do with what's left which is almost a full set -it just needs a 'comb' section fabbing and welding to the LHD outer runner. The white ones are RHD the other LHD.
£200
Can post at your cost or collect from Leatherhead (Surrey) = 2min J9/M25