Engine out jobs?

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Here's a few related topics:

http://forum.earlybay.com/viewtopic.php?f=4&t=13887" onclick="window.open(this.href);return false;
http://forum.earlybay.com/viewtopic.php?f=4&t=41075" onclick="window.open(this.href);return false;
http://forum.earlybay.com/viewtopic.php?f=4&t=33518" onclick="window.open(this.href);return false;
http://forum.earlybay.com/viewtopic.php?f=4&t=28794" onclick="window.open(this.href);return false;
 
Can't be arsed reading the other threads !


Replace the filler hose for the tank

Upgrade to alternator

Oil bath stand needs altering

Check the wiring

Spray waxoyl down the side cavities of the fuel tank
 
Supertramp said:
What jobs would you do while the engine is out?
So far I have:
Replace Fuel Sender
Check clutch


fuel sender
clutch check/replace
waxoil everywhere you can squirt it
clean and seal tank
new filler neck
new breather hose
new fuel hose
underseal the area above the box thats a pain in the arse to get to normally
check and replace battery tray if its rotton
ditto for CV boots as access is much better with no engine in the way

Also if your so inclined then a swap to alternator and the DP style tin with the oil cooler in the seperate bit behind is a good option too.

I did most the last time it was out and I'll be doing the rest the next time which wont be long given the brakedown I had on the way back from its first MOT on tuesday..... :oops: :lol:
 
Pretty much as above, but also fit a fuel cut off solenoid, seam seal around the battery tray to outer skin, lick of paint and replace clutch and bearing, clean out bell housing and replace starter bush.


Sent from my GX64 SatCom phone using Tapatalk
 

Latest posts

Top