Hi all,
The fuel gauge stopped working, so I have fitted a new fuel sender unit, checked for continuity in the wiring,and good earths, but the gauge dosnt move.
The needle goes to full if I earth out the feed at the sender end.
I have 12v going into the fuel gauge, but only 5.5v coming out (to feed the sender), is this right ???
Thanks in advance
Regards
Daren
The fuel gauge stopped working, so I have fitted a new fuel sender unit, checked for continuity in the wiring,and good earths, but the gauge dosnt move.
The needle goes to full if I earth out the feed at the sender end.
I have 12v going into the fuel gauge, but only 5.5v coming out (to feed the sender), is this right ???
Thanks in advance
Regards
Daren