HELP fitting the front trailing arms

[andys]

I have fitted the top ones but i can not get the lower ones on. as in the pic.

the lock nut is the lower arrow and it needs to be were the top arrow is as thats were the resess is on the springs :? HELP[/img]

Will i need to split the ball joints :? to get the right angle, or is there a way with out spliting the ball joints. :?
The top tube has an ajuster fitted if that helps.
Thanks andy.

 

[slammedkustom]

you need to pop the spindle off as its really hard to do with it attached.
pop the arms into the beam and then fit the spindle, make sure the bus is secure as they can be a bugger to fit due to the bump stop being in the way.
good luck

 

[Alzy]

It`ll be helluva tough trying to fit them with the spindles attached as slammedkustom says!!

Whip the spindles off of the joints and it`ll be much easier!!

I recently fitted mine (after a mate fitted them wrongly)!

Cheers