Is there an easier way to get the steering wheel off.

[kempy]

Taken the nut off and put plenty of WD40 on but still won't shift.
Used a rubber mallet to try and shift but doesn't want to know.

Should i just keep trying or do i need some sort of clamp to pull from the back ?????????????????????

 

[Araon]

A universal pulley puller but protect your wheel if you intend to keep it/pass it on.

Cheap from any motor factors.

Or brute force and ignorance.

Free from deep within yourself.

 

[bayview]

Or brute force and ignorance.

Free from deep within yourself

:lol: If using brute force keep the nut on the end of the thread or you may end up with a face full of wheel! :shock:

 

[ocelot]

boiling water poured over the boss worked for me

 

[Guest]

i used a heatgun/paint stripper gun to heat it up with no water to dry off.

 

[easy]

boiling water poured over the boss worked for me

thats the way to do it!! :wink:

 

[VWAIRCOOLED]

Undo the nut leaving it still on at the end a few threads,then someone pull on the steering wheel firmly and someone else place a wide punch on the centre of the steering column and hit it with a hammer! After a few taps it should come free.You don't have top go mad with the hammer though.

 

[Shaggy]

dude i had the same problem, I have 3 pullers I got them cause i had the same problem, I only needed one, I can send you the middle sized one if you like as I don't need it and its so easy with one of them