After the recent engine bay refurb, got the engine in with help from my son. Connected everything up and during a dry run (no ignition, no fuel) got a horrible rubbing noise. Removed fan belt, found the noise coming from the fan area. Found that when putting the engine in, must have pushed on the fan housing and it moved slightly. Fixed this issue. Plumbed in fuel, and external oil cooler. Engine started first turn of the key, but stopped after a couple seconds. Trying to restart, only getting a click from the starter solenoid. Out with the starter, stripped down, cleaned, bushes checked, back in the engine. Still no start. Quick trip to GSF in Lincoln and the best part of a ton for a new starter and the engine now turns over, only to find oil pissing out of the ext cooler all over my drive. Engine off sharpish, checked oil line connections, after a clean up found the oil coming from the matrix. So out with the cooler and lines re-routed just to the external oil filter.
Checked lights, all working except for the hazard flashers. So out with the glove compartment and a wiggle of the fuses and relay, hazards now working.
buttoning everything up only to find that now the rear hatch lock is not working!!!
What next, hoping to go to Glampfest on the 17th.
Good job I love my bus...
Checked lights, all working except for the hazard flashers. So out with the glove compartment and a wiggle of the fuses and relay, hazards now working.
buttoning everything up only to find that now the rear hatch lock is not working!!!
What next, hoping to go to Glampfest on the 17th.
Good job I love my bus...