1967 Neptune Blue Deluxe

[sparkywig]

Hinges and handle fitted. Can't find the handles I've stashed, so used this one until I can find those.
The board is in place but not fixed, as the bed will have to come out to fit the flooring and trim panels when they're finished.

 

[Pete B]

Today was spent butchering some ply, the Westy bed base to be exact.

View attachment 9757

Drop down door marked out. The bacon sandwich was very nice.

View attachment 9752View attachment 9753

The router came out for the edge trim slot in the panel and door.

View attachment 9754

I bought some American cherry veneer a while back just for this.

View attachment 9755View attachment 9756

Glued and clamped. Next job is trimming the veneer, a bit of oil to finish and then the edge trims can be glued on.

View attachment 9758

'butchering some ply' you say? Mate, that looks a cracking job, quality workmanship!

 

[sparkywig]

'butchering some ply' you say? Mate, that looks a cracking job, quality workmanship!

Thanks mate, it looks alright from where you are.

 

[andrewblackwell]

Nice touch how the wood grain pattern matches up.

 

[sparkywig]

Nice touch how the wood grain pattern matches up.

That's why I cut it out of one piece of veneer.

 

[sparkywig]

Diesel heater fuel tank arrived and has been fitted.
That was a nice easy job that took most of the day because someone had previously bolted a remote oil filter housing under the battery tray.

 

[milfredo]

Looks great!

 

[Ben72Bay]

Diesel heater fuel tank arrived and has been fitted.
That was a nice easy job that took most of the day because someone had previously bolted a remote oil filter housing under the battery tray.

View attachment 9883

Really like that solution for the fuel tank (looks lovely work as well!) - would have much preferred to put mine then if I didn't have the second battery in that location.

 

[sparkywig]

Really like that solution for the fuel tank (looks lovely work as well!) - would have much preferred to put mine then if I didn't have the second battery in that location.

I was going to fit another battery there and then get a wedge shaped tank made that fitted in front of it between the spare wheel well and wheel tub.

 

[Ben72Bay]

I was going to fit another battery there and then get a wedge shaped tank made that fitted in front of it between the spare wheel well and wheel tub.

@sparkywig
That’s a neat idea.
Gets the fuel out of the living space.

Tricky to fill maybe?
Do you know someone that could make that wedge tank?
If so I’d appreciate their details please.

 

[creationblue]

Nice work, where is your leisure battery going? I remember @Bundy put his at the front for better weight distribution and I would love to change the position of mine too for the same reason

 

[sparkywig]

I haven't fitted a leisure battery.

 

[sparkywig]

So, after yet another aftermarket ignition switch failing I've had to strip the steering column again.
I had a new switch in stock, but this was just as notchy and stiff as the previous ones.
The good news is that I found an original switch in a box of parts.

 

[sparkywig]

The bad news is that the horn now doesn't work.

 

[ozziedog]

The bad news is that the horn now doesn't work.

Ozziedog,,,,,,,,,welcome to the club

 

[creationblue]

My horn don't work either if it's any consolation..............na thought not

 

[ozziedog]

My horn don't work either if it's any consolation..............na thought not

If only we knew a great eeeeelecticianwho might fix all these dodgy hooters.

Ozziedog,,,,,,,,,,,, Hooters,,,, now there’s a place and a half

 

[sparkywig]

Picked the trim cards up this week, so made a start this morning.
Cleaned up the original trim rings.



Slightly nervous cutting holes in brand new trim panels.












I'm after some of the rubber matting that fits around the seat base, don't need the complete pieces just the bit that is in the pic below.
The usual suspects sell the complete set for around £130, but I'll be throwing away 3/4 of it.