Parts Wanted Need 4 of these please…

[lambrettatastic]

sold my old beam as a complete unit and now realise I need so many bits .
Where can I source a set of these collars please.

 

[sparkywig]

Any of the usual suppliers, they're the torsion arm seals.

https://www.alanhschofield.com/ourparts/prod_2579026-Front-Torsion-Arm-Seal-6879-211405129A.html

 

[lambrettatastic]

Any of the usual suppliers, they're the torsion arm seals.

https://www.alanhschofield.com/ourparts/prod_2579026-Front-Torsion-Arm-Seal-6879-211405129A.html

No mate it’s the collars behind the seals..

 

[Clem]

Id give someone like Simon Ballard at NOSVW a shout. Best bet would be to knock a set off a rusty scrap beam.

 

[Iansg60]

FYI, If you are using a new aftermarket beam the bearings could be a different size (O/D) and the original seal carriers are a loose fit in the beam. I had to get some reducing collars made so I could press the OG collars in to run the seals correctly. Mine was from JK (narrowed 2")

 

[AircooledKate]

Is it this that you’re looking for? Excuse the squiggly circling, I’m on the peasant wagon

 

[lambrettatastic]

Is it this that you’re looking for? Excuse the squiggly circling, I’m on the peasant wagon

Yes mate.

 

[lambrettatastic]

Id give someone like Simon Ballard at NOSVW a shout. Best bet would be to knock a set off a rusty scrap beam.

Thanks mate… yes should have done this when I sold the rusty scrap beam I took off

 

[davidoft]

I may have some will take a look

 

[AircooledKate]

Yes mate.

Cool, I’ll see if we can source them for you

 

[AircooledKate]

Yes mate.

We can get these for you, they’re £23.50 each plus postage. Do you need 2?

View attachment 7478sold my old beam as a complete unit and now realise I need so many bits .
Where can I source a set of these collars please.

We have 4 of these in, you can order them here https://www.classicvolks.com/aircoo...swagen-t2-bay-parts/front-axle-needle-bearing

 

[Clem]

I looked tonight, my narrowed beam doesn’t have the seal cups, just the seals , and it’s been fine.

 

[Graham L]

We can get these for you, they’re £23.50 each plus postage. Do you need 2?

We have 4 of these in, you can order them here https://www.classicvolks.com/aircoo...swagen-t2-bay-parts/front-axle-needle-bearing

It's not the bearing he's after, it's the cup that sits in the end of the beam end in front of the bearing.

 

[garytype2]

Coolcampers 07979 726763

 

[lambrettatastic]

All sorted guys thank you.