Slow Acceleration Works quick Blip Engine nearly dies

[Shaggy]

Hello again ok been looking around before I ask this question, got the engine tuned, runs nicely now so very happy with that. My issue is now that if I pull away as normal all good, but if I blip the pedal then the revs drop and nearly cut out, the carb is set up right its a 34 PICT/3 the bottom screw is out about 3 turns and the top one gets it to idle around 850/900 the points are set to 49, I guess its a fuel starvation thing but I am not sure

 

[steve92]

the points are set to 49,

your points should be set to 0.016"inch or 0.4mm.

 

[Joval]

The 49 is dwell degrees, and spot on.

Just guessing; remove the air filter and see if you get a decent squirt of petrol when you blip by hand..

 

[steve92]

the points are set to 49,

your points should be set to 0.016"inch or 0.4mm.

i tried!

 

[Joval]

the points are set to 49,

your points should be set to 0.016"inch or 0.4mm.

i tried!

:wink: