72 Sierrayellow Westy

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
*Sam* said:
Cracking work Reto looks like it will be a great bus, nice garage by the way.

Thank you! :) Will do my best! The first idea was, to be ready with the bus this summer! But as you all know, there is allways much more work to do than you expect! So we are looking forward the the summer 2015... :lol:
 
Yesterday I put the kitchen sink back in the bus. Was a quick job! In the cool box there is a small hose for the refrigerated compartment. Can anybody tell me, where this hose goes to? I've no idea! :?

P3212568_zps6528458d.jpg
 
I think the one you are talking about goes from the ice tray drain through a hole in the back of the cool box and then out of the hole in the floor.
 
*Sam* said:
I think the one you are talking about goes from the ice tray drain through a hole in the back of the cool box and then out of the hole in the floor.

That's exactly what I mean! Then it goes out the floor like the outflow from the kitchen sink?
 
Aircooler said:
Yesterday I put the kitchen sink back in the bus. Was a quick job! In the cool box there is a small hose for the refrigerated compartment. Can anybody tell me, where this hose goes to? I've no idea! :?

P3212568_zps6528458d.jpg

Any trouble fitting the drain breather?? I have tried two times now and i can´t get it right. It is as if the headliner is in the way or something. :?
 
Have you put a new floor in ? is it exactly the same thickness as the old one ? if its thicker then it push the sink unit up and intern the breather pipe won't fit.
 
*Sam* said:
Have you put a new floor in ? is it exactly the same thickness as the old one ? if its thicker then it push the sink unit up and intern the breather pipe won't fit.

I think it is the same hight. thanks I´ll try it again. The interior is out so try doing it right this time. BTW your van is awesome :D
 
Steenfeldt said:
*Sam* said:
Have you put a new floor in ? is it exactly the same thickness as the old one ? if its thicker then it push the sink unit up and intern the breather pipe won't fit.

I think it is the same hight. thanks I´ll try it again. The interior is out so try doing it right this time. BTW your van is awesome :D


If the floor has the same thickness, you wouldn't have any problem! :)
 
Small update before the weekend... More will come next week!

Engine cover get some filler...

P4052890_zps391fca66.jpg


And finally some fresh sierra yellow! :)

P4052898_zpsb9f4b6ef.jpg


P4052896_zpsc97d29d5.jpg


Have a nice weekend!
 
Some time ago, but here some pics from our trip to the Volksworld Show 2014. Had a really great time! :D

P3302822_zps45d40170.jpg


P3292786_zps4f6dd2c2.jpg


P3292701_zps3b38f3ca.jpg


http://i792.photobucket.com/albums/yy209/Aircooler86/P3292692_zps1e7a2732.jpg[/img

One of my favorit bays!
[img]http://i792.photobucket.com/albums/yy209/Aircooler86/P3292642_zps40dd2f6c.jpg

Look at this stance!!! Sadly no chance for the Swiss Mot!
P3292613_zpsb78f7273.jpg


Cheers!
Maumlnu_5_zps420f42a9.jpg


See you next year!
Maumlnu_3_zpsd8a103bf.jpg
 
After we were back from Esher I had to weld some louvers from a Renault in the engine hood from a good friends bug.

The two hoods...
P4052907_zpsfb4686ce.jpg


Make some marks for the cuts...
P4052909_zpsc4f7d88c.jpg


Take the exact position...
P4052912_zpsa0890d9c.jpg


And weld them in!
P4052914_zps23906ce6.jpg


For the moment, I've no pics from the finally hood. Will follow later....
 
Start with the rear decklid...

P4052919_zps4235136f.jpg


P4052918_zps2cbbfaa4.jpg


The ignition Coil got some fresh paint

P4052901_zps3d637705.jpg


And I've also prepare the alternator for some fresh paint.
P4052905_zpsbb85796c.jpg
 
Hi everybody!
Some time is gone since my last post, but I'm still working hard to get the westy back on the street!

The tailgate got his final paint. I know, it's not perfect, but I'm happy with the result! We did all the work in the backyard from my parents, so I would say it looks not too bad! :)

P6213104_zpsa7a3b15b.jpg


CH = Switzerland ;)

P6213107_zpsd285c0d5.jpg


The engine lid

P6213130_zpsed01e9d6.jpg


P6213129_zpsf748e3c5.jpg


After painting, I've grinded the fresh paint with some 1200 sandpaper. After grinding, I gave the paint a good polish!

At the engine I had some troubles to mount the engine mounting bar with the full flow oil pump.

First I had to cut off some steel.

Foto5_zps3bad95ea.jpg


Then I made a custom piece of steel.

Foto7_zps37f29ff6.jpg


Then started the welding.

Foto4_zpsbbbadebb.jpg


And finally powdercoated and mounted on the engine.

P6143088_zpsdf0c5d87.jpg


P6143087_zpsd04cb5d6.jpg


Now the engine is nearly done. Only the carburetor need a rebuild.

P6143090_zps362bfe08.jpg


I got the right intermediate plates for the rear bumper from a guy from Berlin. First I had the wrong ones from a Split. One the pic you can see the difference...

Left Baywindow, right Splitwindow
P6213114_zps9e65c398.jpg


Mounted on the bumper

P6213120_zpscf3fee1d.jpg


The wheels are out the house to get some black paint.

P1262474_zpsed840cf3.jpg


I got also a set of original porsche central caps from my buddy Walter. :) :)

I had the great pleasure, to drove his 164 hp bug to the Luftkraft DynoDay! This engine is pure ****! Walter put all his knowledge from 40 years of racing in this car! I had the whole day a big smile on my Face, thanks Walter!

P5243077_zps06805c3d.jpg


Was a great meeting, with great cars and really cool people from Switzerland and Germany!

P5243093_zpsc8803fd6.jpg


P5243091_zps946d0d68.jpg


Have a nice weekend!
Cheers
Reto
 
gninnam said:
Paint looks good in the pics so well done 8)

Thanks! :) Next step is to blend the welded areas on the bus. Hope the result will be worth all the work! There is still a lot of OG paint on the bus, so I try to save as much possible!
Regards
Reto
 
Hi everybody!
One week of holiday means, one week in the garage! :lol: Some more work is done on the bus. At the start of my holiday, I thought I could do more. But as always, the time is running and the week is over!
So here some pics from last week in the garage!

Prepared the back of the bus for some fresh sierra yellow.
P7283296_zpsa2dc3203.jpg


Painted :)
P8013351_zps2785199f.jpg


P8013347_zps8d7aa105.jpg


If the paint is dry, I will polish the whole back of the bus.

I also gave the underside of the sliding door some fresh paint.
P7213228_zpsbe3524d9.jpg


And after cleaning up the sliding door, I've mounted back the westy window.
P7293327_zpsaf61e7bb.jpg


Gave all doors some protection wax.
P7283320_zpsa7b92eda.jpg


I've also mounted the panels in the doors. At first my girlfriend grind them with sandpaper and gave them some protection with clear lacquer. So we could get all the original panels with some nice patina!
P7283321_zpsddc3b32e.jpg


VOLKSWAGEN batch back on its place!
P7283317_zps378d800a.jpg


Next work was to repair the Eberspäcker BN4 heater. One fuse was missing and the wiring was not how it should be. After some good cleaning and the small repairs, the heater works like on their first day! ;)
P8013345_zps9867e2b1.jpg


I got a new light for the license plate. Was a quick job!
P7283308_zps3855b482.jpg


And last but not least my fuchs rims good some detailing from Andi Siegrist, aka Mr.Rennmeister! Thanks a lot! :D :D
WP_002740_zps49c1ccbb.jpg


Wish you all a nice weekend!
Best regards
Reto
 
Nice job 8)

I have the Eber BN4 but not sure if I will use it but will see ;)
 
gninnam said:
Nice job 8)

I have the Eber BN4 but not sure if I will use it but will see ;)

Thanks! :)
The Eberspächer works really well! If you go camping when the weather isn't so good, you will never ever freeze! ;)
 

Latest posts

Top