Bay Narrowed Beam Plates

[pye1man]

Cnc cut from 10mm Mild Steel Plate £37 posted


also have split too

 

[Bondo]

Hi
will they fit a split beam?I want to fit one on my 70 bay.

Daz

 

[pye1man]

Hi
will they fit a split beam?I want to fit one on my 70 bay.

Daz

Hi Daz,

Yes any early bay beam wil fit in a split so I cant see any reason why you cant go the otherway! Do you have disc's of drums i.e wide five or small five..


Cheers


Andy

 

[Bondo]

Hi
The beam is from a split so wide 5 and the bay is also wide 5 but the end plates are not the same as split.Whats the next show you ere going to.



Daz

 

[Guest]

Split beams will fit all earlybays up to aug 69 AFAIK, (exactly the same bolt pattern).

If you want to fit a split beam to a 70 and later bus you will require adapters to be welded to it, as the pattern is slightly wider. There are a few traders selling them on here, Airkraft is one i think?

 

[pye1man]

Split beams will fit all earlybays up to aug 69 AFAIK, (exactly the same bolt pattern).

If you want to fit a split beam to a 70 and later bus you will require adapters to be welded to it, as the pattern is slightly wider. There are a few traders selling them on here, Airkraft is one i think?

Yeah thanks for that!

The tubes are a different diameter on late bays and centres differ too....but I have the plates you need Daz, I'll be up MSBM some time if can wait or post no worries either way...


cheers

Andy

 

[Big Red]

hello Andy

i'm interested in a pair of the plates, will they fit a '72? and where abouts in our sunny aircooled land are you?

Steve

 

[pye1man]

hello Andy

i'm interested in a pair of the plates, will they fit a '72? and where abouts in our sunny aircooled land are you?

Steve

Hi Steve,

Yes I've got plates for your 72 and I'm in Gloucestershire....


Cheers

Andy

 

[bugfez]

ill have a set of plates off you for a 72 bay, do you accept paypal?
37 quid posted?

 

[pye1man]

ill have a set of plates off you for a 72 bay, do you accept paypal?
37 quid posted?

I do but you will have to add 5% for their rip off fees...Also please confirm your stud pattern i.e wide or small five....


Cheers


Andy

 

[bugfez]

its small 5 pattern, 72 rhd servo braked bay
39 quid posted?

 

[pye1man]

its small 5 pattern, 72 rhd servo braked bay
39 quid posted?

yes mate paypal details: pye1man (@) hotmail.com (remove spaces & brackets)



cheers


Andy

 

[pye1man]

ttt

 

[bugfez]

received yesterday

thanks pye1man

 

[pye1man]

received yesterday

thanks pye1man

That's great news good luck with your beam manufacturing...


cheers


Andy

 

[pye1man]

ttt

 

[Loxy]

Are thtese still available?
Might be interested in a couple of sets, are you going to BVF?

 

[mankywelshman]

hi loxy, pye1man is currently in the good ole u.s. of a. he should be back by the weekend, i'm sure he's still got some :wink:

 

[Loxy]

Cheers for letting me know, will give him a shout when he gets back.

 

[pye1man]

hi loxy, pye1man is currently in the good ole u.s. of a. he should be back by the weekend, i'm sure he's still got some :wink:

Cheers Sim (tried every where for chocolate tooth paste to no avail ) , I'm back! yes I have plenty of sets, how many are your after Loxy


cheers



Andy