hi guys I currently have adjusters on the front but want to lower about 50 mm I have lowered the rear between 1/2 splines with adjustable plates, im running 17" wheels with 205/50 on rear. and 195 40 on the front, I have about 110mm from top of tyre to underside of wheel tub. if I fit transporterhaus dopped spindles can I simply adjust the height to where I require? and do they push the wheels out? so then I need a narrowed beam.
dropped spindles
- Thread starter Baz70bay
- Start date
Help Support Early Bay Forum:
*Sam*
Well-known member
- Joined
- Dec 25, 2011
- Messages
- 2,301
- Reaction score
- 0
They won't add any width, your adjustment depends on what position your adjusters are currently on.
Have you taken your measurement from the centre of the wheel tub to the tyre or from the lowest point which is the step just inside the arch ?
It will make a difference and is where my tyres were rubbing before I fitted a narrowed beam.
Have you taken your measurement from the centre of the wheel tub to the tyre or from the lowest point which is the step just inside the arch ?
It will make a difference and is where my tyres were rubbing before I fitted a narrowed beam.
