Rear bumper irons

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

vw_mad

Well-known member
Joined
Sep 14, 2010
Messages
308
Reaction score
0
Hi can any one please tel me the distance between the fixing holes to the plate that fits inside the inner side of the rear bumper
I hope this makes Sence .
Trying to find this info out on Earlybay, crossover bay and late bay.
Thanks
 
Here you go fella, all part of the service 8)

9FE25387-4977-4DEC-87DD-450756426413-33653-0000098995DDB1DC_zps397e2d3e.jpg
 
Hi thanks for that .
But not what I was looking for
My first message is little misleading .
Looking for the measurement from the fixing hole that bolts to the underside of van to the plate that fixes to the inside of bumper .
Hope this makes more sense . Thanks
 
Are the rear one's long or short if I remember they both have a bend in them. Let me get this right, you want the measurement from the plate on the end to the bolt hole centres of which there are 2?
 
Yes mate that's right the longer irons
From the front of the plate that bolts to the inside of the bumper to the first fixing hole at the end of the iron.
This is because I don't have a bumper on my van and the towbar I brought fixes to this position and the bumper bolts to the towbar.
Thanks .
 
Bay-low71 said:
Here you go, gives you a rough guide.

azy8ade3.jpg


daragyzu.jpg


And if my eyesight is right using the measurement app (35mm slots)

za6y2e6e.jpg


Ben
Could someone please do this for a crossover rear iron too. Many thanks in advance ;)

Regards, Si
 

Latest posts

Top