reverse is bitch

[littlemark]

Need your advice/ help guys.
Reverse gear is starting to be a pig to get in, all other gears are fine with no crunching and have Got a stock shifter.
cheers

 

[Ands1]

Try adjusting clutch cable mate
Andy

 

[thejinx]

Probably teaching to suck eggs but you are pushing the stick down to change into reverse

 

[Ands1]

When clutch needs adjusting reverse is a bit cheaper to get in with a little crunch sometimes, I also found 1st & 2nd difficult to pull in.

 

[littlemark]

Cheers ands1 will try that. Looked at all the bushes and thay look fairly new probably changed be the po.

Very funny the thejinx

 

[Ands1]

Cheers ands1 will try that. Looked at all the bushes and thay look fairly new probably changed be the po.

Very funny the thejinx

Make sure you fully understand how to adjust, you don't want your thrust bearing sitting against the pressure plate.
It should be just off so it's not constantly spinning

 

[thejinx]

8) I changed a my bushes and still couldn't find reverse properly. Got stuck facing the sea in Bracelet Bay down the mumbles so had to push the van backwards. I bought an EMPI gear shift from Heritage and it solved my problem.