stooopid question.... probably

[chenzo]

think my motor is still running a bit lean,

does the idle mixture screw on a pict 34 only adjust the mixture at idle? - like it says? :roll:

If i want to make it run a bit richer at all rpm do i have to change the jetting? - I'm not sure whether the PO may have messed with things (and i've just rebuilt the carb)

 

[creationblue]

Hi mate, you wanna wind the mixture screw in then out 2.5 turns then adjust the idle screw to get the idle just right.

Just

 

[chenzo]

yeah, that is how i set it up after rebuilding the carb, it just seems to be still a bit on the lean side.

just wondering if i can add fuel throughout the rpm range/all throttle openings

 

[creationblue]

what 34pict are you running? If its the 34pict/3 then it should have a power jet behind a brass screw on the left side (i think) this could be to small.

Have a good read here mate http://www.vw-resource.com/34pict3.html#carb" onclick="window.open(this.href);return false;

Just

 

[chenzo]

is there an easy way to know which carb i have?

 

[creationblue]

It should say on the casing............have a good look round it

Just

 

[chenzo]

Didn't see anything when I rebuilt it