OLIVE-BAY
Well-known member
- Joined
- Dec 7, 2010
- Messages
- 528
- Reaction score
- 0
Morning, having a problem with our 68 bay running a 1600 twin port with 009 dizzy, on pulling sway I have a huge flat spot that I just can't cure. I've replaced the points and condenser, the ht leads, coil, plugs, and dizzy are recent replacements. I've tried turning the body of dizzy to fine tune the timing but then I end up with a really slow turn over when trying to start the van. The battery is brand new and starter motor was replaced last summer.
I have also checked that the rubber hose from the air cleaner to the top of the carb is not cracked and is sealed.
Any suggestions?
Cheers
Oli
I have also checked that the rubber hose from the air cleaner to the top of the carb is not cracked and is sealed.
Any suggestions?
Cheers
Oli