G Goldensyrup Well-known member Joined Sep 21, 2013 Messages 208 Reaction score 0 Jul 1, 2017 #1 How can istop my indicator arm from moving ?? When I put signal on
7 72baywesty Well-known member Joined Jun 26, 2012 Messages 220 Reaction score 0 Jul 1, 2017 #2 There are 2 very small Allan bolts that clamp it to the column ( one above one below) just njp them up
There are 2 very small Allan bolts that clamp it to the column ( one above one below) just njp them up
G Goldensyrup Well-known member Joined Sep 21, 2013 Messages 208 Reaction score 0 Jul 1, 2017 #3 Both of those are tight. I might have to try and put something underneath to try and bulk it up
D Daisybay Active member Joined May 8, 2016 Messages 42 Reaction score 0 Location British Columbia Jul 2, 2017 #4 I wrapped some Electrical tape around the steering column on mine. It fixed the problem!
G Goldensyrup Well-known member Joined Sep 21, 2013 Messages 208 Reaction score 0 Jul 2, 2017 #5 Good idea, I'll give that a go
W Webbaldo Well-known member Joined Mar 11, 2014 Messages 756 Reaction score 0 Jul 3, 2017 #6 Daisybay said: I wrapped some Electrical tape around the steering column on mine. It fixed the problem! Click to expand... What he said, it works. Try not to overtighten the screws as the metal slots the C shaped clamp slide into are quite weak and can crack on the housing
Daisybay said: I wrapped some Electrical tape around the steering column on mine. It fixed the problem! Click to expand... What he said, it works. Try not to overtighten the screws as the metal slots the C shaped clamp slide into are quite weak and can crack on the housing
