Raising the front on adjusters asistance

[wilkie]

I have a standard beam with adjusters welded in and lowered about 5". I find this a little severe and would like to raise it abit. What is the best method for setting the height with adjusters?

Any help would be very greatful

 

[uber cool]

Jack up the front until the wheels are off the floor. Place on axle stands. Undo the adjuster so it clears the serations on the adjusters. Move the bolt up to raise. Retighten the bolt. Do this for both bottom and top beam.

 

[ant]

Jack up the front until the wheels are off the floor. Place on axle stands. Undo the adjuster so it clears the serations on the adjusters. Move the bolt up to raise. Retighten the bolt. Do this for both bottom and top beam.