Spring Valley Bus meets Corvair

[creationblue]

Tightening torque 130 Nm (96ftlb) if anyone is interested, this is for Porsche. I'll chech this later and test again

Thanks all

 

[yachty]

Absolutely none whatsoever. Don't be shy with tightening the nuts up.
Did you remove the powdercoated from the back of the wheels, where it mates to the hub?

 

[creationblue]

Absolutely none whatsoever. Don't be shy with tightening the nuts up.
Did you remove the powdercoated from the back of the wheels, where it mates to the hub?

Yea all done mate, I will torque them up and test again 8)

 

[creationblue]

 

[sparkywig]

We can see if they'll fit on mine if you want....

 

[creationblue]

We can see if they'll fit on mine if you want....

:lol: Test fit you mean?

 

[r73]

8) you might wanna change the other 2 donuts while your there? Have fun i found the new donuts are a bit of a mare to fit. I used some longer bolts to pull the covers on with first.
Great bit of kit them Slamwerks plates are tho

 

[sparkywig]

Donuts are easy to fit, just don't use any lube....

 

[r73]

Donuts are easy to fit, just don't use any lube....

That was obviously the problem then I used silicon spray

 

[yachty]

I'll probably get shot down for this but copper slip works a treat on donuts

 

[Bundy]

I'll probably get shot down for this but copper slip works a treat on donuts

I found that too, so you're not alone for the firing squad :msn4: :lol:

 

[r73]

I'll probably get shot down for this but copper slip works a treat on donuts

I found that too, so you're not alone for the firing squad :msn4: :lol:

I tried that as well - was still flippin awkward and I hated it :?

 

[creationblue]

An I missing something here :lol: :?:

 

[r73]

An I missing something here :lol: :?:

:lol: basically get sparky wig to fit your springplates :lol:

 

[creationblue]

An I missing something here :lol: :?:

:lol: basically get sparky wig to fit your springplates :lol:

:lol: he only like welding things Rob!

 

[sparkywig]

An I missing something here :lol: :?:

:lol: basically get sparky wig to fit your springplates :lol:

:lol: he only like welding things Rob!

You can have them welded on if you want.

 

[creationblue]

:lol:

 

[r73]

:lol:

 

[creationblue]

Bit of an update............Had a rusty scab on the dogleg behind the bumper step, about the size of a 50p, well it turned out to be quite a job! Pics to follow of the work that went into fabing the new parts out of a repro (shite) panel. This is the bit cut out

All good metal now tho, loads of work to get the correct bend on the corner

This seam was looking a bit worse for wear, so that was attached and treated too 8)

The inside of the step was shocking really, glad it was done before it spread and caused more work.

Slamworks

Before

After

Then ran out of fuel on the way home...........what a prick :lol:

 

[Bundy]

Looking very nice mate 8)
Shame about the fuel...mine goes way below the R, but I can't get it much passed 3/4 when full :lol: