mr scoops Well-known member Joined May 8, 2010 Messages 1,144 Reaction score 0 Jul 9, 2018 #1 Does anybody know about blanking off the air bleed tubes next to the mixture screws on a Weber IDF?
K@rlos Well-known member Joined Sep 8, 2008 Messages 5,173 Reaction score 870 Location Felixstowe, Suffolk Year of Your Van(s) 1970 Van Type Westfalia pop-top Jul 9, 2018 #2 Put a picture up
mr scoops Well-known member Joined May 8, 2010 Messages 1,144 Reaction score 0 Jul 10, 2018 #3 The guy balancing the carbs made some blanks using some fuel hose. I will get the guy who rolling roads it to put the proper blanks in place. For reference, it is the ports next to the idle mixture. Ignore the red ringed port, I pinched the pic from Samba.Com
The guy balancing the carbs made some blanks using some fuel hose. I will get the guy who rolling roads it to put the proper blanks in place. For reference, it is the ports next to the idle mixture. Ignore the red ringed port, I pinched the pic from Samba.Com
K@rlos Well-known member Joined Sep 8, 2008 Messages 5,173 Reaction score 870 Location Felixstowe, Suffolk Year of Your Van(s) 1970 Van Type Westfalia pop-top Jul 10, 2018 #4 Ah right. You can buy proper blanking bungs on eBay or any decent motor factor