CB performance air filters
- Thread starter AxlFoley
- Start date
Help Support Early Bay Forum:
Sorry, no I don't. But I can tell you it's definitely not metric.
I'd be tempted to rethread the base and fit some M4/M5 threaded rod, at least you'll be able to get some fasteners that fit.
I'd be tempted to rethread the base and fit some M4/M5 threaded rod, at least you'll be able to get some fasteners that fit.
K@rlos
Well-known member
- Joined
- Sep 8, 2008
- Messages
- 5,288
- Reaction score
- 1,138
- Location
- Woodbridge, Suffolk
- Year of Your Van(s)
- 1970
- Van Type
- Westfalia pop-top
^^^^^ this! it’s some god forsaken UNC thread, don’t know why the yanks can’t just use Metric like everyone else in the developed world, especially when building parts for European vehicles which are metric!
drill & tap it for an m5 heli-coil then get some studding & wing nuts to suit 
- Joined
- Nov 9, 2006
- Messages
- 177
- Reaction score
- 421
We only do this because you forgot to capitalize “Yanks”.^^^^^ this! it’s some god forsaken UNC thread, don’t know why the yanks can’t just use Metric like everyone else in the developed world, especially when building parts for European vehicles which are metric!
K@rlos
Well-known member
- Joined
- Sep 8, 2008
- Messages
- 5,288
- Reaction score
- 1,138
- Location
- Woodbridge, Suffolk
- Year of Your Van(s)
- 1970
- Van Type
- Westfalia pop-top
Touché
Just buy a length of 3/16” UNC threaded rod and cut to the length you need. Any decent fastener supplier will have it, or eBay. https://www.ebay.co.uk/itm/285939599316
naskeet
Well-known member
^^^^^ this! it’s some god forsaken UNC thread, don’t know why the yanks can’t just use Metric like everyone else in the developed world, especially when building parts for European vehicles which are metric!
I think science & technology organisation in the USA are gradually making the transition to metric measurement, but it might take a few hundred years to complete the process. Working out U-values for walls can be a challenge when using BTU/hour, with thickness measured in inches and areas in square feet!?! Having used the metric system in science, technology & engineering for more than 55 years, I concur that it is a much simpler and more rational system.
I'm not sure whether UNF - Unified National Fine & UNC Unified National Course are British or American thread-sizes, but it was used on BLMC cars such as my 1974 Triumph Toledo 1300 "HL Special". I suspect there are American thread-sizes used exclusively in the USA.
For some strange reason, The USA are still using Olde English Queen Anne wine-gallons (rebranded as US gallons) as a measure of volume for liquids such as petrol (i.e. gasoline in USA parlance, but confusingly abbreviated to "gas"). Even stranger is the fact that US pints, quarts & gallons for liquid measures are different from US pints, quarts & gallons for dry measures!!!
They also seem to buck the norm by using 110V 60Hz AC mains electricity instead of the almost universal 240V 50Hz AC mains electricity, so if you have an American specification 1968~79 VW Type 2 with mains-hook-up, you might have to completely change the system for use in Great Britain, Europe and the rest of the World..
Euro carb sell 'em if you're wanting an easy option
CB3381 CB Performance air filter stud fixing kit
https://www.dellorto.co.uk/shop/vw-...linkages-parts/cb-air-filter-stud-fixing-kit/
CB3381 CB Performance air filter stud fixing kit
https://www.dellorto.co.uk/shop/vw-...linkages-parts/cb-air-filter-stud-fixing-kit/
UnSlow
New member
- Joined
- Oct 12, 2024
- Messages
- 3
- Reaction score
- 8
- Location
- Los Angeles
- Year of Your Van(s)
- 1968
- Van Type
- Westy
M5 x1 sounds pretty metric to me.
