P Pearls cafe Well-known member Joined Nov 11, 2009 Messages 83 Reaction score 0 Jun 6, 2019 #1 Should there be a bracket/clamp that keeps the spare wheel steady? if so, could someone post a picture please?
Should there be a bracket/clamp that keeps the spare wheel steady? if so, could someone post a picture please?
sparkywig Administrator Staff member Administrator Moderator Supporting Member Joined Feb 9, 2008 Messages 12,645 Reaction score 1,352 Location mostly here, sometimes there Jun 6, 2019 #2 There are three threaded holes in the left rear corner of the bus and you should have two rubber blocks that screw into the two outer holes, and a bent threaded bar with a large bar to secure the spare wheel that screws into the centre one.
There are three threaded holes in the left rear corner of the bus and you should have two rubber blocks that screw into the two outer holes, and a bent threaded bar with a large bar to secure the spare wheel that screws into the centre one.
starbiscuit Well-known member Joined Jul 18, 2012 Messages 189 Reaction score 1 Location Herts UK Jun 6, 2019 #3 I made a bent threaded rod and bar for mine but I was unaware of the rubber blocks. Thanks
P Pearls cafe Well-known member Joined Nov 11, 2009 Messages 83 Reaction score 0 Jun 6, 2019 #4 Thanks, I have none of the above. Will have to make something to do the job
K kempy Well-known member Joined Jul 10, 2007 Messages 1,618 Reaction score 0 Location Cheshire Jun 9, 2019 #5