Progress Pics - Dormobile X-Over

[gninnam]

Hi Andy. I read all through your thread last night. I now I am tipping my hat in respect. Good work! I have nothing but admiration for anybody who can tackle projects like yours. Well done. Looking forward to seeing the progress and results.

Thanks

 

[rallye dale]

A nice bit of progress Andy

 

[gninnam]

A nice bit of progress Andy

Cheers bud

 

[gninnam]

Filled the area I had cut out so I could weld the upright.
Tacked in:

Fully welded in:

Welds ground down:

Skim of filler over the rear repair:

Spray of primer. Will leave then use it to check for high spots:

Managed to follow the curve well:

Hope to finish this area off tomorrow

Cheers.

 

[68_early_bay]

Nice 8)

 

[Myvanway]

Still getting my head around how you guys can cut pieces out and replace in such a manner... Amazing work. 8)

 

[mike202]

+1 great work and perseverance 8)

It'll all be worth it in the end!

 

[gninnam]

Cheers guys

I hope it will be worth it......

 

[gninnam]

Today's adventure then

Its stopper time. Fill in some of the pin holes and larger marks caused by the sand paper:

After plenty of elbow grease started to blow some red undercoat:

Further paint being added:

Several top coats on:

Coming together now:

Couple of shots showing the curves achieved:

 

[gninnam]

Started tidying up the panel on the other side of the light:

Different angle:

Thought I'd try the light in and fits perfectly....result

Cheers

 

[Aazbo]

Smart work, nice to see ya time n effort paying off B-)

Sent from my C2105 using Tapatalk 2

 

[gninnam]

Smart work, nice to see ya time n effort paying off B-)

Sent from my C2105 using Tapatalk 2

Cheers bud

 

[gninnam]

Yesterday evening started to sort out the area that is in front of the neafside rear arch..filler time

And tonight finished of the rear panel between the light and engine hatcn

Cheers.

 

[Dave.P]

You're doing a grand job there Andy !

 

[gninnam]

You're doing a grand job there Andy !

Cheers bud

 

[gninnam]

Seeming that the rear quarter probably won't appear until next year decided to start putting filler on the weld repairs along the offside.

Halfway there but the light started to fade

Cheers

 

[cunning plan]

How do you get the seams back again? :?: :msn4:

 

[Lee C]

Cracking job on the rear corner like !!!!!!!

 

[gninnam]

How do you get the seams back again? :?: :msn4:

Dremel and sand paper

 

[gninnam]

Cracking job on the rear corner like !!!!!!!

Thanks Lee