Got a bit of an issue with one of my rear drums. Last year we had some noise from the rear and found the rear drum loose. Split pin was in place but nut was loose. Took it all apart, replaced bearings and put on a new nut and pin and torqued up correctly. Didnt spot anything obviously wrong so I thought all was good.
Now on the last trip out the noise came back and the nut is again loose, split pin still in place. This is in less than 1500 miles.
So any idea as to what to check? Should I have rechecked the torque after a while? Plan of action at the minute is to retorque but I'm a bit worried something else might be wrong......
Sent from my Nexus 6P using Tapatalk
Now on the last trip out the noise came back and the nut is again loose, split pin still in place. This is in less than 1500 miles.
So any idea as to what to check? Should I have rechecked the torque after a while? Plan of action at the minute is to retorque but I'm a bit worried something else might be wrong......
Sent from my Nexus 6P using Tapatalk